Dallas Cowboys Wincraft White 4X4 Perfect Cut Decal

Licensed Perfect Cut decals are made of outdoor vinyl, permanent adhesive, image precision cut to the outside dimension of logo. Supplied with a clear liner, clear transfer tape, and application instructions.  Wincrafts popular Prefect Cut Decals are supplied with a "Pre Mask" liner to help you apply the decal with precision.  While most of our cards have instructions, sometime the print is small.  You might have found this with our QR code on the packaging.

Directions for application:

1. Clean surface thoroughly (temperature should be above 50° f)

2.  Turn decal upside-down (imprint side down) and place on a flat surface.

3.  Separate the clear liner from the foggy “pre-mask” material making sure the decal stays attached to  the “pre-mask”. If needed, use your fingernail to hold the edge of the decal to the “pre-mask” when removing clear liner.

4.  Carefully place decal in desired position.  With fingers (or a credit card) firmly rub decal from the center out in all directions.

5. Remove “pre-mask” at a 180 degree angle (rub down decal as necessary).

6.  Puncture bubbles with sharp needle; then lightly press area to remove trapped air.